Find your compressor

The FVR series of screw compressors are made especially for low-temperature applications. The unit is engineered for reduced environmental impact and noise levels while maximizing efficiency and reliability throughout its operation.

With a compact and easy-to-install design, the FVR series features 15 different models that are each perfectly suited for a variety of unique situations. In recognition of the high level of quality built into every unit, the FVR series has met the stringent requirements needed for ATEX certification.

The FVR series of screw compressors specifically for medium temperatures are engineered to be quiet, efficient, and extremely reliable.

With a space-saving design, all 30 models in this series are ATEX-certified for quality and perfectly suited for a wide range of refrigeration applications.

The FVR ATEX series of refrigeration screw compressors are engineered for low temperatures and comes with full ATEX certification. Discover 15 different models to choose from to perfectly meet the needs of your unique set-up.

Reduced noise, greater efficiency, and extreme reliability are the hallmarks of the FVR ATEX series. These units are also suitable for use in areas classified as being at risk of explosion (Zone 2).

The FVR series of screw compressors for medium temperature refrigeration is one of the most recent innovations introduced by Frascold.

This series is fully ATEX-certified and consists of 26 different models, each uniquely suited to meet the demands of modern refrigeration. Being quiet, efficient, and reliable, the FVR MT ATEX series is also engineered for use in areas classified as at-risk of explosion (Zone 2).

Frascold provides a complete series of CX EVO compact screw compressors, which are designed to be in complete compliance with EcoDesign directives by achieving energy efficiency and lessening environmental impacts.

The series has 12 different models all geared towards enhanced efficiency, reliability, and versatility, especially under partial loads.

The Frascold CX Air series provides a wide range of different compact screw compressors that are perfectly suited for common types of refrigerant and especially for applications with high compression ratios.

The series has 31 models all characterized by increased efficiency, greater reliability, and ultimate versatility.

The Frascold series of CX Water compact screw compressors are made just for low compression ratios and is perfectly suited for use with all of the most common types of refrigerant. These UL-certified units are ideal for many different applications thanks to absolute ease of integration.

The CX Water series has 29 different models to choose from each raising the bar for standards in efficiency and reliability.

The Frascold CX Air Series of compact screw compressors is perfectly suited to use with the most common types and is ideal for applications with high compression ratios.

The series is fully ATEX-certified and comes with 31 models to meet the unique demands of your operation. The CX Air is one of the most efficient, reliable, and versatile semi-hermetic compact screw compressors on the market. This series is especially useful in areas that are classified as at risk of explosion (Zone 2).

The Frascold Magnetic Series of semi-hermetic compact screw compressors are uniquely suited for the air conditioning and process cooling sectors and especially for applications involving heat pumps.

This series has 5 models to choose from and features an Interior Permanent Magnet (IPM) motor which helps to fully meet the standards required by the EcoDesign Tier 2 regulations

Frascold offers a broad range of open screw compressors specifically designed to operate with high cooling capacities and low compression ratios for applications at medium temperatures. The Open MT Series has eight different models to choose from that are the hallmarks of reliability, efficiency, and versatility all rolled into one.

These units are perfectly suited for a wide range of uses, including with the use of ammonia.

Frascold Open LT Series screw compressors are designed to provide excellent cooling capacity in low-temperature applications with high compression ratios.

The series has eight different models, each designed for maximum reliability, efficiency, and ease of integration to fit a diverse range of uses, including the use of ammonia.

Our standard semi-hermetic reciprocating compressors are designed to guarantee high efficiency, supreme reliability, and excellent performance all in one package.

This series has a full 84 different models to fit the widest range of applications. They are well suited to operate with inverters, while the D, Q, S, V, Z, and W models are engineered to work in tandem with our revolutionary Frascold capacity control RSH head.

These ATEX-certified semi-hermetic reciprocating compressors are engineered to be energy efficient and provide dependable performance, cycle after cycle.

The Reciprocating ATEX Series – HC has 84 models and is great for refrigerants with hydrocarbons and using inverters.

The D, Q, S, V, Z, and W models are also made to be compatible with the leading-edge Frascold capacity control RSH head.

These ATEX-certified semi-hermetic reciprocating compressors are designed with energy efficiency, reliability, and top performance in mind.

The series has 84 different models which are suited for operating with HFO and HFC refrigerants. Inverters can also be used for even greater energy efficiency.

The D, Q, S, V, Z, and W models are also made to work with the cutting-edge Frascold capacity control RSH head.

SK3 reciprocating compressors are designed to guarantee maximum quietness and reliability for all CO₂ subcritical applications.

The special construction of the series within 15 different models allows use with evaporation temperatures all the way down to -50°C (-122°F) and condensation temperatures up to 20°C (68°F).

Frascold’s transcritical Heavy Duty reciprocating compressors are the perfect choice for near-silent operation and ultimate reliability for all transcritical CO₂ applications.

The innovative construction of all 34 models in the series allows these units to operate within many different applications with the very highest safety standards.

Frascold’s two-stage reciprocating compressors have been created to guarantee high levels of cooling power and ensure high efficiency for the entire system.

This series is available in 15 different models each offering high reliability for both low temperature and deep-freezing applications.

A Frascold EB air-cooled condensing unit is the perfect choice for applications in areas with moderate climates where high efficiency and quiet performance are paramount. The EB series is available in 28 different models to meet the specific demands of your unique application. These units are exceptionally quiet, compact, and designed with the commercial refrigeration sector in mind.

A Frascold EBT air-cooled condensing unit is the perfect choice for meeting the unique demands for applications in areas that experience high ambient temperatures. The series comes complete with 28 different models to help our clients find the perfect condensing unit to meet their needs. These units are extremely quiet and relatively compact, making them ideal for the commercial refrigeration industry.

Frascold LBT2 Series air-cooled condensing units have been specifically designed to meet the unique demands of tropical climates.

The series has 28 different models that are each quiet and incorporate a space-saving design. These units are well suited for use in commercial refrigeration.

Our LB2 Series of air-cooled condensing is perfect for applications in moderate climates.

The series comes complete with 28 different models, each uniquely suited to meet our clients’ highest demands. These units feature compact sizing with a whisper-quiet operation to be actively deployed within the commercial refrigeration industry.

The Frascold CX Water Series – UL compact screw compressors are made for low compression ratios and are well suited for use with all the most common types of refrigerants. These units are highly flexible, making them ideal for even the most unique setups.

With quality engineered into every component, these units meet the high standards for UL certification and are available in 27 different models to perfectly match your needs.

The Frascold CX Air series, with UL certification, stands out for its wide range of compact screw compressors, which are suitable for use with all the most common types of refrigerant and perfect for applications with high compression ratios.

The series, with 31 models, is characterised by the greatest efficiency, reliability, and flexibility.

The FVR series of screw compressors for low temperatures, with UL certification, is quiet, efficient and reliable.

With a compact design, it features 11 models, also available with ATEX certification, suitable for a multitude of uses.

The FVR series of screw compressors for medium temperatures, UL certified, is quiet, efficient and reliable.

With a compact design, the series, with 26 models, is suitable for a multitude of uses. 

Frascold two-stage reciprocating compressors, UL certified, have been created to guarantee high levels of cooling power and to ensure high efficiency for the entire system.

This series, with 9 models, is the perfect choice for highly reliable low temperature and deep-freezing applications.

Transcritical reciprocating compressors, UL certified, are the perfect choice for maximum quietness and reliability for all transcritical CO₂ applications.

The innovative construction of the series, with 28 models, allows it to operate in wide fields of application with the highest safety standards.

SK3 reciprocating compressors, UL certified, are designed to guarantee maximum quietness and reliability for all CO₂ subcritical applications.

The special construction of the series, with 11 models, allows it to operate with evaporation temperatures down to -122°F and with condensation temperatures up to 68°F.

These semi-hermetic standard reciprocating compressors, UL certified, are designed to guarantee high efficiency, reliability and performance.

This series, with 74 models, is suitable for operating with inverters, while the D, Q, S, V, Z and W models are compatible with the revolutionary Frascold capacity control RSH head.

The ATEX HT series, short for High Temperature, is designed for use in air-to-water heat pumps and is available with natural refrigerant R290.

Characterized by high gas nameplate pressure, it is distinguished by its ability to produce domestic hot water up to 80°C temperature.

The series consists of 4 sizes, with 16 models from 7 to 70 HP.